Aiming at the problems of inlet and outlet pressure difference, strength of oil filter layer and height of guide pile under working condition of oil filter, the preliminary design of oil filter is evaluated and optimized through the combination of test and simulation, so as to ensure that the inlet and outlet pressure drop and strength of oil filter layer can meet the requirements under working condition, The inertia resistance coefficient and viscosity resistance coefficient of the filter are obtained; The results show that the inlet and outlet pressure drop is less than 10 kPa at - 18 ℃, 25 ℃ and 70 ℃, which meets the relevant requirements. Aiming at the problem that the maximum principal stress of the filter exceeds its tensile strength, the gap between the filter and the guide pile is optimized by CAE simulation analysis, and the maximum principal stress of the filter is reduced from 110.1 MPa to 36.99 MPa, 8 MPa
Strength analysis and optimization of engine oil filter
Jun 18, 2021
Leave a message
