195-60-58410 Product Brief Introduction

195-60-58410 Hydraulic Filter Replacement delivers high-efficiency fluid filtration for heavy machinery. This premium replacement hydraulic filter removes contaminants, protecting sensitive valves and pumps to ensure smooth system operation.

195-60-58410 Product Description

195-60-58410 Hydraulic Filter Replacement provides superior protection for high-pressure hydraulic systems on heavy construction equipment. Engineered with advanced filtration media, this spin-on replacement filter traps micro-particles and debris, reducing system wear and preventing unexpected downtime. It ensures stable hydraulic pressure and optimal performance under severe job-site conditions.

195-60-58410 Product Specifications

Style:	Hydraulic Filter
Dimension 1 (D1):	87.0 mm
Dimension 2 (D2):	83.0 mm
Dimension 3 (D3):	60.0 mm
Thread 1 (D7):	M45X1,5
Height 1 (H1):	155.0 mm
Height 2 (H2):	29.0 mm
Height 3 (H3):	10.0 mm

195-60-58410 Cross Reference / OE Interchange

This high-performance replacement filter directly interchanges with these OE part numbers:

195-60-58410 Installation Guide

Replacing your 195-60-58410 hydraulic filter is quick and easy:

• Prepare the Equipment: Park the machine on a flat surface, lower all attachments, turn off the engine, and release any trapped hydraulic pressure.
• Remove the Old Filter: Place a drain pan underneath the filter housing to catch residual fluid. Use a strap wrench to unscrew and remove the used hydraulic filter.
• Clean the Mounting Base: Wipe the mounting header clean, making sure the old rubber gasket is completely removed and the threads are free of debris.
• Pre-Fill and Lubricate: Apply a thin film of fresh hydraulic oil to the new rubber seal on the 195-60-58410 replacement filter. Pre-fill the filter with clean hydraulic fluid if required by equipment guidelines.
• Install the New Filter: Spin the new filter onto the threaded stud until the gasket contacts the base, then hand-tighten an additional 3/4 to 1 turn. (Do not overtighten).
• Check and Test: Start the engine, run the hydraulic system through its full range of motion, and inspect the filter area for any leaks. Top off hydraulic fluid levels if necessary.

195-60-58410 Compatible Vehicle Application

This hydraulic filter replacement is designed to fit a wide range of Komatsu dozers and wheel loaders: