China Everlasting Parts Co., Ltd. is one of the most professional manufacturers and suppliers of oil filter element s11246 in China. Welcome to wholesale original and genuine oil filter element s11246 from our factory. Contact us for cheap products and OEM service.
Professional Lubrication Series
Premium Cartridge Oil Filter Element S11246
Product Specifications
The dimensional profile and material attributes of this filter element are strictly controlled to guarantee a proper fit within the designated OEM housing assembly.
| Part Number | S11246 |
| Filter Type | Cartridge Element |
| Outside Diameter | 1.81 in (46.0 mm) |
| Length | 6.06 in (154.0 mm) |
| Height | 6.3 in (160.0 mm) |
| Filter Media Material | Cellulose |
| Grade Type | Standard Replacement |
Professional Installation Steps
To ensure a zero-leak seal and optimal system performance, execute the following maintenance procedure:
1
Depressurize and Drain Shut down the engine and allow the system to cool. Locate the filter housing and drain any residual oil.
2
Housing Disassembly Unscrew the housing cap using the correct professional tool to avoid structural damage. Remove the spent cartridge element.
3
Clean and Inspect Wipe the internal housing and sealing surfaces with a clean, lint-free cloth to remove accumulated sludge or debris.
4
Replace Seals Remove the old O-ring from the housing cap. Install the new high-grade nitrile rubber O-ring and lubricate it with clean engine oil.
5
Element Insertion Press the new S11246 cartridge filter firmly into the center of the housing assembly until it seats fully.
6
Torque and Verify Reinstall the housing cap and torque it precisely to the manufacturer's specified rating. Run the engine to check for proper oil pressure and verify zero fluid bypass.
Hot Tags: oil filter element s11246 manufacturers, wholesale, aftermarket, genuine, original, cheap, OEM, replacement
