7C8339 Air Filter

7C8339 Air Filter

The 7C-8339 is a high-capacity, disposable air intake element engineered to provide absolute filtration for large-displacement industrial and marine engines. It serves as a direct technical replacement for the Donaldson P154927 and Fleetguard AH1103, ensuring optimal volumetric efficiency and engine protection under extreme loads.
Send Inquiry
Chat Now
Description

China Everlasting Parts Co., Ltd. is one of the most professional manufacturers and suppliers of 7c8339 air filter in China. Welcome to wholesale original and genuine 7c8339 air filter from our factory. Contact us for cheap products and OEM service.

 

7C-8339 Heavy-Duty Air Induction System

 

A mission-critical primary air filtration element engineered for high-displacement power plants, including the Caterpillar 3406/3408 and Cummins N14/ISX series. Designed for peak volumetric efficiency in high-vibration industrial environments.

Engineered Precision Highlights

Isochronous Flow Optimization With a rated capacity of 1201 cfm (34 m³/min), the 7C-8339 utilizes computational fluid dynamics to minimize intake turbulence. It maintains an ultra-low restriction of 6 inch H2O, ensuring the turbocharger operates at maximum efficiency without parasitic power loss.
High-Compression Radial Seal The element features a proprietary high-shore-hardness urethane radial seal. This vacuum-tight interface is designed to remain stable during extreme thermal cycling, preventing the bypass of unfiltered air-the leading cause of "engine dusting."

The Physics of Absolute Contaminant Sequestration

Unlike standard aftermarket filters, the 7C-8339 utilizes a multi-layered synthetic blend matrix. This media operates on the principles of interception, inertial impaction, and diffusion to trap microscopic silica particles as small as 2-5 microns. In heavy-duty diesel applications, even a few grams of dust can cause irreversible erosion of piston rings and cylinder liners. Our deep-pleat geometry maximizes the effective filtration area, resulting in a higher Dirt Holding Capacity (DHC) and extended operational uptime between service intervals.

Verified Engineering Benchmarks

Manufactured in strict compliance with Verified to OEM Standard Tolerances for 1:1 interchangeability.

Technical Parameter Metric Value (mm / mbar) Imperial Value (inch / H2O)
Model Designation 7C-8339 7C-8339
Overall Total Length 647.7 mm 25.50 inch
Body Exterior Diameter 279.4 mm 11.00 inch
Outlet Connection (ID) 177.8 mm 7.00 inch
Inlet Connection (ID) 228.0 mm 8.98 inch
Maximum Rated Airflow 34 m³/min 1201 cfm
Differential Pressure (Clean) 14.95 mbar 6 inch H2O

IP & Engineering Asset Note: The 7C-8339 housing utilizes 15 years of proprietary mold R&D. Comprehensive 2D/3D CAD datasets are accessible to authorized fleet partners following verified technical inquiry.

Cross-Reference & OEM Compatibility

Our 7C-8339 is validated as a high-performance equivalent to the following industry standards:

Donaldson: P154927
Caterpillar: 7C8339 / 3I0421
Fleetguard: AH1103
Baldwin: PA2650
Luberfiner: LAF8002
HiFi Filter: SA 16139
Wix: 46849
Kohler: 272982
Inline: FA16968

Industry Applications

The 7C-8339 is specialized for high-duty cycles in Logistics (Freightliner FLD Series), Agricultural Machinery (Case IH harvesters), and Maritime Auxiliaries. It is also a preferred solution for 1000KVA+ Power Generation units utilizing Cummins KT1150 or Detroit Diesel 8V92 platforms, providing stable filtration across arid construction zones and high-humidity maritime ports.

Critical Maintenance Protocol

Mandatory Warning: Do not attempt to clean the 7C-8339 with high-pressure compressed air. This causes microscopic fiber ruptures that destroy the absolute filtration rating, leading to catastrophic engine dusting. Replace based on vacuum gauge indicators (typically at 20-25" H2O restriction).

ISO 5011 Performance Verification

Our manufacturing process integrates a 12-Point Quality Control Audit. From media permeability testing to final seal compression analysis, every 7C-8339 unit is built to exceed ISO 5011 air intake standards, guaranteeing structural rigidity under peak vacuum pulses.

Technical FAQ

Q: What is the risk of using a lower airflow rating filter?
A: Using a filter rated below 1201 cfm increases intake restriction, leading to an over-rich fuel mixture, elevated Exhaust Gas Temperatures (EGT), and potential turbocharger surging.

Q: Is the 7C-8339 validated for Detroit Diesel engines?
A: Yes, it is specifically validated for the high-vibration requirements of 6V92 and 8V92 engines commonly found in Kenworth K100 series vehicles.

Q: How do environmental stressors impact service life?
A: In high-dust mining or desert environments, the Dirt Holding Capacity (DHC) may be reached sooner. Daily monitoring of the restriction indicator is recommended.

Factory-Direct Procurement Solutions

Eliminate middleman markups. Specialized in bulk fleet procurement and private labeling for global industrial distributors.

GLOBAL LOGISTICS SUPPORT • ISO 5011 CERTIFIED • OEM COMPATIBILITY GUARANTEED

Hot Tags: 7c8339 air filter manufacturers, wholesale, aftermarket, genuine, original, cheap, OEM, replacement, Air Breather filters, Air Filters, Air Housing AH8925, Bus Filters, Cummins Air Filter, Ingersoll Rand Air Filter