China Everlasting Parts Co., Ltd. is one of the most professional manufacturers and suppliers of 1202846 aftermarket coalescing filter element for industrial gas processing in China. Welcome to wholesale original and genuine 1202846 aftermarket coalescing filter element for industrial gas processing from our factory. Contact us for cheap products and OEM service.
1202846 Industrial Liquid-Gas Coalescing Filter Element
Executive Summary
High-performance aftermarket coalescing filter element designed for deep liquid-gas separation. Engineered with micro-glass fiber media and an Inside-to-Outside flow design, it removes sub-micron oil mists, water aerosols, and solid particulates down to 0.01 ppm residual oil concentration. Complies with ISO 12500-1 and ISO 8573-1 air/gas quality standards to protect downstream compressors, desiccant dryers, and sensitive pneumatic systems.
1. OEM Cross-Reference & Part Identification
To ensure precise fitment and system compatibility, part number 1202846 matches and interchanges with the following OEM and industry part numbers:
| Brand / Manufacturer | OEM Part Number / Cross-Reference | Primary Equipment / Application |
|---|---|---|
| Primary OEM Number | 1202846 | Coalescing Filter Housing Assembly |
| Direct Interchange A | 1202-846 / 1202.846 | Compressed Air & Industrial Gas Line |
| Aftermarket Equivalent | P55-1202846 / HF-1202846 | Industrial Inline Coalescer Housing |
Note: Please verify housing dimensions and O-ring material with our technical team prior to ordering for non-standard gas mixtures.
2. Technical Specifications & Performance Metrics
| Parameter Category | Technical Value | Engineering Standard / Test Method |
|---|---|---|
| Filtration Flow Direction | Inside-to-Outside (In-to-Out Coalescing) | Standard Gas Coalescing Protocol |
| Particle Filtration Rating | 0.1 μm - 1.0 μm (Absolute) | ISO 12500-3 |
| Liquid Aerosol Retention | Down to 0.01 mg/m³ (< 0.01 ppm) | ISO 12500-1 (Oil Aerosol Test) |
| Media Material Construction | Borosilicate Micro-Glass Fiber + Synthetic Drainage Layer | Hydrophobic & Oleophobic Treated |
| Structural Support Caps | Corrosion-Resistant Stainless Steel / Aluminum Endcaps | Epoxy Bonded Structural Integrity |
| Initial Dry Differential Pressure | ≤ 0.12 bar (≤ 1.74 PSI) | Clean Element Standard |
| Recommended Replacement ΔP | 0.6 bar - 0.7 bar (8.7 - 10.1 PSI) | System Efficiency Maintenance |
| Operating Temperature Range | -20°C to +80°C (Standard NBR Seals) | Up to 120°C with FKM/Viton |
3. Engineering Differentiation & Failure Mode Analysis
Material Comparison: Borosilicate Micro-Glass vs. Standard Cellulose
Failure Mode Prevented: Element collapse and liquid re-entrainment.
Why Micro-Glass Outperforms: Standard paper/cellulose media swells and structurally degrades in saturated gas streams. The 1202846 uses multi-layered borosilicate micro-glass with an outer drainage sleeve that coalesces tiny aerosols into heavy droplets without blinding the media pores.
Engineering Tip: Installing a coalescing filter in reverse (Outside-to-Inside) will cause rapid blinding, high differential pressure spikes, and severe oil carryover to downstream valves.
4. Structured Technical FAQ
Q1: What gas types and downstream equipment is the 1202846 coalescing element compatible with?
A: The 1202846 element is engineered for compressed air, natural gas (CNG/LNG process lines), nitrogen, and inert industrial gases. It directly protects downstream reciprocating/screw compressors, molecular sieve dehydration beds, desiccant air dryers, and high-precision pneumatic control valves.
Q2: What is the primary cause of sudden differential pressure (ΔP) spikes across this filter?
A: Sudden ΔP spikes are typically caused by heavy solid particulate contamination upstream or bulk liquid slugging that exceeds the coalescer's drainage capacity. We recommend installing an upstream 5.0 μm particulate pre-filter to extend the service life of the 1202846 coalescing element.
Q3: How do I select the correct seal/O-ring material for my gas application?
A: Standard elements come equipped with Nitrile (NBR) seals suitable for mineral oils and standard air streams up to 80°C. For aggressive synthetic lubricants, sour gas, or high-temperature environments, specify Fluoroelastomer (FKM/Viton) O-rings when placing your order.
5. Logistics
- ■Minimum Order Quantity (MOQ): 60 Pieces (Standard Wholesale Export Packaging)
- ■Customization Capabilities: Private labeling, OEM box branding, customized endcap laser etching.
- ■Quality Certification: Factory leak-tested; manufactured in compliance with ISO 9001 Quality Management System.
Need Engineering Support or CAD Dimensional Drawings?
Contact our technical department today to confirm housing thread pitch, request technical data sheets (TDS), or get custom volume pricing tiers.
Hot Tags: 1202846 aftermarket coalescing filter element for industrial gas processing manufacturers, wholesale, aftermarket, genuine, original, cheap, OEM, replacement



